Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

基于图剖分的多块结构网格负载平衡方法

负载平衡是影响并行计算性能的重要因素。针对多块结构网格,给出了一种改进的多层次图剖分负载平衡方法。该方法设计了新的网格剖分算法,采用改进的子块分裂方法与图剖分算法的循环调用实现结构对接网格剖分,并通过建立不同物体重叠网格间的连接关系,实现了结构重叠网格的负载平衡。采用2个典型算例对方法进行了对比验证,数值结果表明,子块分裂方法对剖分结果具有重要影响,采用循环调用算法及改进的子块分裂方法能有效地实现计算负载均衡及通信量优化,同时显著减少了网格块数及因虚网格导致的内存需求,有利于提高并行效率。该负载平衡方法与网格拓扑无关,适用于多块结构对接网格及重叠网格,且整体型剖分方式对于多块结构重叠网格具有更好的剖分效果。     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

可压缩粘性流动笛卡尔网格虚拟单元方法研究

以二维高雷诺数可压缩粘性流动问题为背景,提出了一种全新的笛卡尔网格虚拟单元方法。基于壁面函数基本假设,构造了壁面函数-虚拟单元方法(WF-GCM),用于定义湍流壁面边界条件。引入参考点的概念计算虚拟单元上的基本变量与湍流变量值,定义了"非贴体"笛卡尔网格下的湍流壁面边界条件,并通过壁面函数模型修正近壁面单元与界面单元。基于自适应笛卡尔网格体系,采用发展的具有二阶精度的格心格式有限体积求解器,数值模拟了跨音速RAE2822翼型绕流问题与超音速圆柱绕流问题,计算结果与实验值吻合良好,显示了WF-GCM对高雷诺数可压缩粘性问题是有效的。     

导弹大迎角下非线性诱导滚转力矩数值研究简

 采用计算流体力学（CFD）数值模拟方法,研究战术导弹大迎角状态下涡破裂导致滚转力矩随迎角非线性增长引起舵面控制能力不足的现象。首先通过标准模型的数值分析,验证了所采用的CFD方法具有三角翼前缘涡破裂现象的捕捉能力;然后采用雷诺平均Navier-Stokes方程对某“++”字正常布局导弹构型（含弹翼、弹身、尾舵和整流罩等）进行了数值模拟,结果显示亚声速状态下滚转力矩在迎角大于20°时出现非线性增长,导致全动尾舵的滚转控制能力不足。通过分解各部件对滚转力矩的贡献,并分析流场结构,探明了该现象发生的流动机理,其主要原因是：随着迎角的增长,弹体迎风面的尾舵前缘涡首先发生破裂,导致其平衡诱导滚转力矩的作用被削弱。     

气膜孔内局部堵塞对气膜冷却特性的影响

在吹风比为0.3~1.5,堵塞比为0.1~0.5范围内,对平板上单排倾斜气膜孔内局部堵塞所引起的冷气射流流动和冷却特性变化进行了数值研究,分析了堵塞比、堵塞位置和吹风比对绝热气膜冷却效率的影响.在研究参数范围内的研究结果表明:气膜孔出口端前缘的局部堵塞有利于抑制肾形涡,对气膜孔下游的绝热气膜冷却效率有改善作用,并且随着堵塞比和吹风比的增加,对冷却效果的改善越为明显.而在气膜孔出口端尾缘或侧边的堵塞则在较大的堵塞比下削弱气膜冷却效果.相对于气膜孔出气端的局部堵塞,在气膜孔进气端和中部的堵塞对绝热气膜冷却效率的影响要微弱得多.     

水热-凝胶法ZrO2 气凝胶的制备与表征

以硝酸氧锆为锆源,尿素为凝胶促进剂,通过水热凝胶法结合超临界乙醇干燥,可成功制备出具
有良好纳米三维网络结构的ZrO2 气凝胶。采用透射电镜(TEM)、比表面积及孔隙度分析仪(BET),X 射线衍
射仪等测试手段对其结构进行了表征与测试。结果表明,ZrO2 气凝胶主要由无定型和四方晶相组成,其比表
面积为445 m2 / g,孔径主要分布在5 ~7 nm 和30 ~40 nm 两处。     

超声速隐身歼轰机概念设计数值模拟

为了提高军用飞机的空战和对面攻击能力,对歼轰机进行总体设计。采用CATIA软件,设计出隐身歼轰机的三维数字样机和武器挂载方案;基于物理光学法和等效电磁流法,采用自编的RCSAnsys软件,数值模拟歼轰机的数字样机在X、S和UHF波段下的RCS特性和强度分布特性;基于湍流模型的k-ε方程和控制理论的N-S方程,采用Fluent软件,数值模拟歼轰机的数字样机所在空气流场的压强和速度分布云图,得出整机的升阻特性。概念设计数值模拟结果表明：内置弹舱的歼轰机前向±30°的RCS均值≤-4.728 dBsm,超声速飞行时歼轰机的升阻比约等于5.6337。     

旋转直管流场的数值模拟

根据旋转坐标系下的 Favre平均 NS方程以及旋转条件下的流动特征 ,修改了 B/ L湍流模型 ,并提出了一种旋转条件下出口边界压力分布的给定方法 ,对已有的 NAPA通用湍流计算软件进行了改进和发展 ,并计算了旋转直管中的流动。通过与实验数据的比较 ,文中的计算结果与实验结果吻合较好 ,正确反映了流动特征和物理现象 ,验证了修改后的 NAPA软件的可靠性。     

NUMERICAL STUDY OF TWO INTERFACE METHODS FOR COMPRESSIBLE MULTI-FLUID FLOWS

INTRODUCTIONThe direct numerical simulation of com-pressible multi- fluid flows is an important re-search topic with various key applications.Therelatively dominant difficulty of simulation lies intreatment of the moving material interface. Ingeneral,there are two basic approaches to treatcontact discontinuities.The first,front trackingmethod[1,2 ] ,explicitly characterize the interfacemotion by the motion of individual points on theinterface. The other approach is front capturingmethod[3…